WORCAM PETG Metallic Pink 1kg

WORCAM PETG Metallic Pink 1kg

WORCAM PETG Metallic Pink is a versatile filament for users looking for a combination of strong and durable material with a distinctive metallic pink appearance. Unlike PLA, PETG offers higher toughness and temperature resistance, while still being relatively easy to print and suitable even for less experienced users. This filament is intended for FDM/FFF 3D printers with a string diameter of 1.75 mm and a fill weight of 1 kg. In terms of construction and printing parameters, it is based on the proven WORCAM PETG series (e.g., black variant), so you can rely on a stable diameter, consistent winding, and repeatable results.

---

Main advantages of PETG material

• Higher strength and toughness than common PLA – suitable for functional parts and mechanically stressed components
• Better temperature resistance – parts deform less in heat than those made of PLA
• Low shrinkage and minimal deformation during printing
• Good chemical resistance (water, some cleaning agents, etc.)
• Virtually odorless printing
• Suitable for most common FDM/FFF printers with a diameter of 1.75 mm

---

Metallic Pink color

Metallic Pink adds an attractive surface effect to the classic properties of PETG:

• Metallic gloss and fine shimmer that highlights model details
• Ideal for design and decorative prints, figures, cosplay accessories, covers, promotional and gift items
• Masks minor layer imperfections well compared to fully smooth and glossy surfaces

---

Typical use of WORCAM PETG Metallic Pink

• Design and representative models
• Covers and parts of consumer electronics, holders, mounts
• Functional prototypes and technical components
• Decorations, figures, cosplay elements, promotional items
• Practical items for the home or workshop where PETG durability and an interesting color are useful

---

Recommended print settings

(take as default values – specific settings may vary depending on the type of printer, hotend, and cooling)

• Nozzle temperature: approx. 230–245 °C
• Bed temperature: approx. 75–85 °C
• Print speed: approx. 40–80 mm/s (for a better surface on decorative models, rather 40–60 mm/s)
• Cooling: low to medium (approx. 20–60% depending on model geometry)
• Bed: textured or satin PEI sheet, glass with suitable adhesive, other surfaces intended for PETG

For the best adhesion we recommend:

• a clean bed (e.g., cleaning with isopropyl alcohol),
• for smooth PEI sheets, the use of a separation layer (glue stick, special adhesive product) to prevent "baking" the PETG to the surface.

---

Storage and care for filament

PETG is less hygroscopic than, for example, nylon, but moisture from the air can degrade print quality:

• store the filament in a closed bag or box with desiccant,
• if the string pops during operation or if the surface of the prints is rough, it is advisable to dry the filament (e.g., in a filament dryer or a food dehydrator at approx. 55–65 °C for several hours).

---

Technical specifications

Parameter	Value
Material	PETG (polyethylene terephthalate‑G)
Manufacturer / Brand	WORCAM
Color	Metallic Pink
Filament diameter	1.75 mm
Diameter tolerance	± 0.05 mm
Fill weight	1 kg
Recommended nozzle temperature	230–245 °C
Recommended bed temperature	75–85 °C
Recommended print speed	40–80 mm/s
Print type	FDM/FFF 3D printing
Area of use	Functional parts, prototypes, decorations, technical models

---

Key features

• High-quality PETG filament WORCAM 1kg, 1.75 mm
• Metallic Pink color with attractive gloss
• Higher strength, toughness, and temperature resistance compared to PLA
• Low shrinkage, minimal deformation, virtually odorless printing
• Suitable for functional and design prints
• Compatible with most desktop FDM/FFF printers using 1.75 mm filament

Key features:

• High-quality PETG filament by WORCAM with a diameter of 1.75 mm and a fill weight of 1 kg
• Attractive Metallic Pink color with a fine gloss for design prints
• Higher strength, toughness, and temperature resistance than PLA – suitable for functional parts and technical components
• Low shrinkage and minimal deformation during printing, easy setup on most FDM/FFF printers
• Stable diameter and high-quality winding for reliable and consistent printing
• Universal use – from prototypes and covers to decorations, figures, and promotional items
• Recommended printing temperatures 230–245 °C, bed 75–85 °C, speed approx. 40–80 mm/s