WORCAM Filament PETG Red Brown 1kg

WORCAM PETG Red Brown 1kg – durable filament for everyday use

WORCAM PETG in a red brown shade is a high-quality filament designed for reliable 3D printing of functional and aesthetic parts. PETG material combines printability similar to PLA with mechanical resistance approaching ABS. Thanks to low shrinkage during printing, it is also suitable for larger models and precise technical parts. The red brown color gives your prints an elegant yet subtle look – great for design accessories, electronics covers, mounts, jigs, or models for hobby and professional use.

---

Main advantages of WORCAM PETG material

• High toughness and strength – suitable for mechanically stressed components, mounts, jigs, and functional parts.
• Better heat resistance than PLA – parts deform less at higher operating temperatures.
• Low shrinkage and warping – models adhere well to the build plate; the filament is suitable for larger prints.
• Easy printing similar to PLA – no enclosed chamber required; suitable even for slightly advanced users.
• Consistent filament diameter – stable feeding and even layers for a quality print surface.
• Universal use – compatible with most common FDM/FFF 3D printers using 1,75 mm filament diameter.

---

Recommended applications

WORCAM PETG red brown is particularly suitable for:

• functional and structural parts (mounts, brackets, jigs, parts for 3D printers)
• covers and boxes for electronics
• technical models, prototypes, and small series of parts
• decorative and designer elements, interior accessories

---

Recommended print settings

Specific values may slightly vary depending on the printer type, hotend, and cooling. Treat them as starting recommendations and fine-tune if needed.

• Nozzle temperature: approx. 230–250 °C
• Bed temperature: approx. 70–85 °C
• Print speed: approximately 40–60 mm/s
• Fan: medium power (lower than with PLA, for better layer adhesion)
• Build plate: glass, PEI, textured sheet, etc. – it is recommended to use a suitable adhesive aid (glue, spray, etc.)

---

Technical parameters of the filament

Parameter	Value
Material	PETG
Color	Red Brown
Filament diameter	1,75 mm
Spool weight	1 kg (material on spool)
Diameter tolerance	approx. ±0,05 mm (typical for WORCAM PETG)
Recommended nozzle temperature	230–250 °C
Recommended bed temperature	70–85 °C
Print type	FDM / FFF
Recommended cooling	30–70 % depending on model geometry
Suitable for	Most 3D printers with 1,75 mm diameter

---

Tips for achieving high-quality prints

• Before printing, check the cleanliness of the nozzle and the condition of the build plate; PETG adheres better to a degreased surface.
• If adhesion to the build plate is too strong, lower the first layer temperature or use a separation layer (e.g. glue stick).
• For higher part strength, increase the nozzle temperature and slightly reduce cooling.
• For bulky prints, consider lower speed and higher bed temperature to minimize warping.

WORCAM PETG red brown 1kg is an ideal choice for anyone looking for a universal, durable, and easy-to-print filament for everyday use in the workshop, laboratory, and home 3D printing.

Key properties:

• Czech PETG filament in an attractive red brown color for functional and design prints.
• High strength and toughness – suitable for mechanically stressed and structural components.
• Better heat resistance than PLA, while maintaining relatively easy printability.
• Low shrinkage and good adhesion to the build plate – suitable for larger and precise models.
• Stable filament diameter for smooth feeding and a quality surface finish of prints.
• Universal use in most FDM/FFF 3D printers with 1,75 mm diameter.