WORCAM Filament 1.75mm PETG Orange 1kg

WORCAM PETG Orange 1.75mm, 1kg

PETG filament WORCAM Orange is a universal material for demanding functional parts as well as attractive colored models. It combines easy printing similar to PLA with better thermal resistance and toughness.

Main advantages of PETG WORCAM

• Excellent strength-to-flexibility ratio – suitable for mechanically stressed parts, holders, covers, and technical components.
• Higher temperature resistance than PLA – for parts used in warmer environments (car interior, proximity to heat sources, etc.).
• Low shrinkage and good layer adhesion – minimizes deformation and cracking of prints.
• Easy printing without significant odor – comfortable use even in home conditions.
• Stable orange color – a distinct, highly visible shade suitable for safety elements, prototypes, and design models.

Recommended printing parameters

Parameters are based on the WORCAM PETG filament series and common settings for high-quality PETG printing:

• Nozzle temperature: 230–245 °C
• Bed temperature: 75–85 °C
• Recommended printing speed: around 80 mm/s
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.05 mm
• Tested with nozzle: 0.4 mm
• Spool weight: 1 kg
• Spool compatible with: Bambu Lab AMS

Always adjust specific settings to your printer, cooling, and print geometry. For PETG, milder cooling than for PLA and a stronger adhesive first layer are usually recommended.

Typical use of PETG WORCAM Orange

• functional prototypes and technical parts
• holders, grips, electronics covers
• parts requiring toughness and impact resistance
• outdoor elements protected from direct UV radiation
• safety and warning elements thanks to the distinct orange color

PETG material properties

• combination of PLA properties (easy printing) and ABS (higher thermal and mechanical resistance)
• higher resistance to moisture and chemicals than PLA
• very good layer adhesion, parts are less brittle

Tips for successful printing

• Print on a heated bed (glass, PEI, textured sheet), optionally with glue or spray for better adhesion.
• Limit drafts around the printer – you will reduce the risk of deformation in larger prints.
• If stringing occurs with PETG, try slightly increasing retraction and lowering the temperature within the recommended range.
• Store the filament in a dry place, ideally in a resealable box or with a moisture absorber.

WORCAM PETG Orange 1.75mm, 1kg is a reliable filament for users looking for a durable, versatile material in a highly visible orange color – suitable for both everyday printing and functional prototypes and practical parts.

Key features:

• Universal PETG filament suitable for functional and design prints
• Distinct orange color for highly visible parts and safety elements
• Easy printing similar to PLA, but with higher temperature resistance and toughness
• Stable diameter of 1.75 mm with a tolerance of ±0.05 mm for reliable filament feeding
• Verified trouble-free printing with a 0.4 mm nozzle
• Recommended printing speed around 80 mm/s for fast and high-quality printing
• Spool compatible with the Bambu Lab AMS system
• Low shrinkage and very good layer adhesion – lower risk of print deformation