PRINT-ME Swift PETG lime green 1 kg

PETG is a tough material – it is extremely durable and prints without odor. It prints very nicely with a surface quality similar to PLA. Thanks to its low shrinkage during printing, this material is suitable for printing large objects. Unlike other materials, PETG is more resistant to acids and solvents, as well as high and low temperatures. Printed parts can be heat-formed or flame-polished. This is another material that should be on your list right after PLA. PET-G can be quite harmful to the environment, so it is advisable to recycle it. Complete decomposition of PET-G takes decades.

Here are the main advantages of printing with this material and common properties of PETG filament:

• Very durable; more flexible than PLA or ABS, but also a bit softer.
• Hard to break in half, so if you need a “shatterproof” case or cover, PETG beats almost everything (except Nylon 12).
• Has very low shrinkage, therefore no warping. Ideal for printing large items.
• PETG is also very strong, not brittle, but it can be scratched more easily than ABS, which is harder.
• PETG is not very good for printing supports because it adheres extremely well. But because it adheres so well, layer adhesion is fantastic, making prints strong and durable.
• It also adheres well to the build plate, so be careful when removing prints.
• Has high chemical resistance along with resistance to alkalis, acids, and water.
• Printing is odorless.

PET-G surface finishing: It is advisable to first spray the print with a filler primer (putty used in modeling), then sand and clear-coat it, repeating as needed—until the surface is completely smooth—and finally spray with color.

Bonding PET-G: Polyurethane adhesive, cyanoacrylate (super glue), and two-part epoxy are suitable for bonding PET-G.

Recommended PET-G printing settings: Commonly used nozzles are suitable. Diameters can be chosen according to the surface finesse you want to achieve or the chosen layer height. Printing temperature: 240 °C. A heated bed is not required, but for better adhesion you can heat the bed up to 75 °C.

The filament is vacuum-packed together with a desiccant and placed in a cardboard box. The plastic spools on which the filament is wound may differ in vent pattern or color. We strive to maintain 100% repeatability of winding and color.

For more information about 3D printing materials, you can use our material glossary https://3dstisk.cz/materialovy-slovnik/

For 3D printing tips, photos and videos of filaments, and current discounts, follow us on our social networks:
TikTok: https://www.tiktok.com/@3dstisk
Instagram: https://www.instagram.com/3dstisk/
Facebook: https://www.facebook.com/profile.php?id=100086437153541
Twitter: https://twitter.com/3dstisk
Youtube: https://www.youtube.com/@3dstisk