Prusament PLA Blend Ms. Pink 1kg

PLA has a relatively low melting temperature of 175 degrees Celsius. Unlike so-called thermosets, PLA can be repeatedly heated above its melting temperature with very little material degradation. It is also a very hard, but therefore brittle material, and once it breaks, it often shatters. PLA, like any other material, also has several weaknesses. A side effect of the low melting temperature is low heat resistance, prints start to lose mechanical strength already at temperatures above 60 °C. The combination of low UV resistance and low heat resistance means that PLA prints are not ideal for outdoor use. PLA is soluble only in chemicals such as chloroform or hot benzene. Therefore, it is better to use glue for joining several prints together. Although PLA is a health-safe material when in contact with food, we do not recommend repeatedly drinking or eating from your 3D prints. Small cracks on the surface that are created during printing can allow bacteria to multiply over time. When finishing PLA surfaces, it is better to use wet sanding. Without water, the plastic can quickly heat up due to friction, melt locally and thus make further sanding more difficult.

Print settings

Nozzle	215 °C
Heated bed	50-60 °C

Key properties

	Easy to print		Brittleness
	Prints fine details		Low heat resistance
	Suitable for printing large models		More difficult post-processing
	Hardness
	Does not warp

Notes

This PLA was manufactured directly by us at Prusa Research. This 1.75 mm filament was manufactured with a precision of ± 0.02 mm (± 0.03 mm for blends)