PLA Lemon Drop (citronová) PRINT-ME 1.75 mm 1 kg

PLA filament 1.75 mm is the most versatile material for FDM printing technology, also suitable for printing large objects. Thanks to its easy-to-print properties, we recommend PLA to all beginners starting with 3D printing. Another big advantage is 100% environmental biodegradability, as PLA is made from renewable resources such as corn starch. PLA material is hard and durable like other plastics; however, it is not suitable for outdoor use because it degrades and becomes brittle under UV light.

PLA surface finishing

The material is difficult to sand; sanding (friction) generates heat, which causes strands to “pull” from the print. Therefore, when hand sanding, it is recommended to cool the print, for example by wet sanding. For the same reason, drilling holes in the print is also difficult (again, heat buildup). It is advisable to first spray the part with a filler/primer (putty used in modeling), then sand and clear-coat it, repeating until the surface is completely smooth, and finally spray with paint.

Gluing PLA

Cyanoacrylate (super glue) with an aerosol activator (sometimes the super glue alone is sufficient).

Recommended PLA print settings

Commonly used nozzles are suitable. You can choose diameters according to the surface detail you want to achieve or the selected layer height. Printing temperature: 210 °C. PLA filament benefits from a heated bed; for better adhesion we recommend heating it up to 55 °C. We also do not recommend enclosing the printer for PLA; if you have an enclosure, leave it open. For high surface quality, the plastic should be cooled as quickly as possible after exiting the nozzle. We therefore recommend setting the part cooling fan on the printer to 100%.

The filament is supplied vacuum-packed with a desiccant and placed in a cardboard box. The plastic spools on which the filament is wound may differ in embossing or color. We strive to maintain 100% consistency of winding and spool color.