Nebula PETG Light Chameleon / Chameleon Lights (White) 1 kg

PETG is a tough material – it is extremely durable and prints without odor. It prints very nicely with a surface quality similar to PLA. Thanks to its low shrinkage during printing, this material is suitable for printing large objects. Unlike other materials, PETG is more resistant to acids and solvents, as well as high and low temperatures. It is possible to heat-form a printed object made from it or flame-polish it. This is another material that has to be on your list right after PLA. PET-G can be quite harmful to the environment, so it is advisable to recycle it. Complete decomposition of PET-G takes decades.   Here are the main advantages of printing with this material and common properties of PETG filament:

• Very durable, it is more flexible than PLA or ABS, but also a bit softer.
• It is hard to break it in half, so if you need an “unbreakable” case or cover, PETG beats almost everything (except Nylon 12).
• It has very low shrinkage, and therefore does not warp. Ideal for printing large objects.
• PETG is also very strong, it is not brittle, but it can be scratched more easily than ABS, which is harder.
• PETG is not very good for printing supports because it sticks extremely well. But since it sticks so well, the layer adhesion is fantastic, so the prints are strong and durable.
• It also adheres well to the print bed, so be careful when removing it after printing.
• It has high chemical resistance along with resistance to alkalis, acids, and water.
• Printing is odorless.

  PET-G surface finishing: The print should first be sprayed with a filler (putty used in modeling) and then sanded and varnished, again and again – until the material is completely smooth, and finally sprayed over with paint. Bonding PET-G: Polyurethane adhesive, super glue, and two-component epoxy are suitable materials for bonding PET-G. Recommended settings for printing PET-G: Commonly used nozzles are suitable. We can choose diameters according to the surface smoothness we want to achieve or according to the set layer height during printing. Printing temperature: 240 °C. Heating the bed is not required, but for better material adhesion we can heat the bed up to 75 °C. The filament is vacuum-packed together with a moisture absorber and placed in a cardboard box. The plastic spools on which the filament is wound may differ in embossing or color. We strive to maintain 100% repeatability of winding and color.