Bambu TPU for AMS redefines the TPU printing experience with improved performance and seamless integration with AMS. It is perfectly suited for vivid multi-color projects and opens up exciting possibilities in printing flexible materials. With a Shore hardness of 68D, Bambu TPU for AMS offers impressive toughness while minimizing stringing, ensuring easy printing like PLA, but with the characteristic flexibility and durability of TPU.
Seamless Integration with AMS and AMS lite
Bambu TPU for AMS is optimized for use with the AMS system, allowing smooth and reliable multi-color printing with flexible materials.
Tough, yet Flexible
With a Shore hardness of 68D, Bambu TPU for AMS combines exceptional toughness with the flexibility and durability of TPU. It is ideal for printing durable, impact-resistant parts such as protective cases, phone covers, door stops, sports equipment, automotive parts, and much more!
Goodbye, TPU stringing
Say goodbye to stringing with Bambu TPU for AMS! Its special formulation significantly minimizes common stringing issues found in traditional TPU, ensuring clean and sharp details in every print for a smoother and more reliable printing experience.
Lightning-fast TPU printing
Bambu TPU for AMS achieves up to 60% higher printing speeds compared to Bambu TPU 95A HF, increasing efficiency without compromising on quality. Get more work done in less time with fast and reliable results!
| Property |
Bambu TPU for AMS |
Bambu TPU 95A HF |
| Nozzle temperature (°C) |
230 |
230 |
| Max. volumetric speed (mm³/s) |
18 |
12 |
| Printing speed (mm/s) |
Up to 238 |
Up to 147 |
| Model samples |
Diameter: 50mm, Height: 100mm, Infill: 40% |
|
Application Tips
The flexibility of TPU prints is related to the
Wall Loops setting and
Sparse Infill Density. The higher the number of wall loops or sparse infill density, the lower the flexibility, and vice versa.
Accessory Compatibility
| Category |
Recommended |
Not recommended |
| Build Plate |
Smooth PEI Plate, Textured PEI Plate |
Cool Plate SuperTack |
| Hotend |
Hotend with hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm, Hotend with stainless steel nozzle 0.4 mm |
Hotend with hardened steel nozzle 0.2 mm, Hotend with stainless steel nozzle 0.2 mm |
| Glue |
Bambu Liquid Glue, Glue Stick |
|
| AMS and AMS lite |
AMS & AMS lite |
|
TPU for AMS Hex Code Table
| Color |
Hex Code |
Display |
| Red |
#ED0000 |
|
| Yellow |
#F9EF41 |
|
| Blue |
#5898DD |
|
| Neon Green |
#90FF1A |
|
| White |
#FFFFFF |
|
| Gray |
#939393 |
|
| Black |
#000000 |
|
RFID for Intelligent Printing
All printing parameters are embedded in an RFID chip, which can be read using our
AMS (Automatic Material System). Just load and print! No more tedious setup steps.
Recommended Print Settings
| Setting |
Value |
| Drying settings (Drying oven) |
70 °C, 8 h |
| Print and storage container humidity |
< 20 % RH (Sealed, with desiccant) |
| Nozzle temperature |
220 - 240 °C |
| Bed temperature (with glue) |
30 - 35 °C |
| Printing speed |
< 250 mm/s |
Physical Properties
| Property |
Value |
| Density |
1.26 g/cm³ |
| Vicat softening temperature |
N / A |
| Heat deflection temperature |
N / A |
| Melting temperature |
183 °C |
| Melt flow index |
21.8 ± 0.3 g/10 min |
Mechanical Properties
| Property |
Value |
| Tensile strength |
22.4 ± 0.6 MPa |
| Elongation at break |
＞650 % |
| Flexural modulus |
N / A |
| Flexural strength |
N / A |
| Impact strength |
N / A |
