Bambu TPU for AMS redefines the TPU printing experience with enhanced performance and seamless integration with AMS. It is perfectly suited for vibrant multi-color projects and opens up exciting possibilities in printing flexible materials. With a Shore 68D hardness, Bambu TPU for AMS offers impressive toughness while minimizing stringing, ensuring easy printing like PLA, but with the characteristic flexibility and durability of TPU.
Seamless Integration with AMS and AMS lite
Bambu TPU for AMS is optimized for use with the AMS system, allowing for smooth and reliable multi-color printing with flexible materials.
Tough, yet Flexible
With a Shore 68D hardness, Bambu TPU for AMS combines exceptional toughness with the flexibility and durability of TPU. It is ideal for printing durable, impact-resistant parts such as protective cases, phone covers, door stops, sports equipment, automotive parts, and much more!
Goodbye to TPU Stringing
Say goodbye to stringing with Bambu TPU for AMS! Its special formulation significantly minimizes common stringing issues found in traditional TPU, ensuring clean and sharp details in every print for a smoother and more reliable printing experience.
Lightning-Fast TPU Printing
Bambu TPU for AMS achieves up to 60 % higher print speeds compared to Bambu TPU 95A HF, increasing efficiency without compromising quality. Get more work done in less time with fast and reliable results!
| Property |
Bambu TPU for AMS |
Bambu TPU 95A HF |
| Nozzle temperature (°C) |
230 |
230 |
| Max. volumetric speed (mm³/s) |
18 |
12 |
| Print speed (mm/s) |
Up to 238 |
Up to 147 |
| Model samples |
Diameter: 50mm, Height: 100mm, Infill: 40% |
|
Application Tips
The flexibility of TPU prints is related to the
Wall Loops settings and
Sparse Infill Density. The higher the number of wall loops or sparse infill density, the lower the flexibility, and vice versa.
Accessory Compatibility
| Category |
Recommended |
Not recommended |
| Build plate |
Smooth PEI Plate, Textured PEI Plate |
Cool Plate SuperTack |
| Hotend |
Hotend with hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm, Hotend with stainless steel nozzle 0.4 mm |
Hotend with hardened steel nozzle 0.2 mm, Hotend with stainless steel nozzle 0.2 mm |
| Glue |
Bambu Liquid Glue, Glue Stick |
|
| AMS and AMS lite |
AMS & AMS lite |
|
Hex Code Table for TPU for AMS
| Color |
Hex Code |
Preview |
| Red |
#ED0000 |
|
| Yellow |
#F9EF41 |
|
| Blue |
#5898DD |
|
| Neon Green |
#90FF1A |
|
| White |
#FFFFFF |
|
| Gray |
#939393 |
|
| Black |
#000000 |
|
RFID for Intelligent Printing
All printing parameters are embedded in the RFID chip, which can be read by our
AMS (Automatic Material System). Just load and print! No more tedious setup steps.
Recommended Print Settings
| Setting |
Value |
| Drying settings (Drying oven) |
70 °C, 8 h |
| Printing and storage container humidity |
< 20 % RH (Sealed, with desiccant) |
| Nozzle temperature |
220 - 240 °C |
| Bed temperature (with glue) |
30 - 35 °C |
| Print speed |
< 250 mm/s |
Physical Properties
| Property |
Value |
| Density |
1.26 g/cm³ |
| Vicat softening temperature |
N / A |
| Heat deflection temperature |
N / A |
| Melting temperature |
183 °C |
| Melt flow index |
21.8 ± 0.3 g/10 min |
Mechanical Properties
| Property |
Value |
| Tensile strength |
22.4 ± 0.6 MPa |
| Elongation at break |
＞650 % |
| Flexural modulus |
N / A |
| Flexural strength |
N / A |
| Impact strength |
N / A |
