Bambu Lab PLA-CF Burgundy Red (burgundy red with carbon fibers)
Product details
- SKU:
- 921082526063
- Brand:
- Bambu Lab
- Category:
- Filament
Product description
Bambu PLA-CF
Bambu PLA-CF is a carbon fiber–reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and suitable for beginners like regular PLA. It is AMS-compatible with a low risk of clogging during high-speed printing. Prints have a matte finish with nearly invisible layer lines, making it suitable for printing general engineering parts or models requiring a better appearance, such as bike frames, mounts, and toys.
Carbon fiber texture and minimized layer lines
The addition of carbon fibers gives prints a unique matte surface and effectively hides layer lines, providing a smooth, premium look.
Showcase of prints
Bambu PLA-CF can be paired with any filament in the PLA lineup to make your prints more colorful and achieve different texture requirements.
Improved mechanical properties
Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY flexural strength, Z flexural strength, XY flexural modulus, Z flexural modulus, XY impact strength, and Z impact strength by 20% and 115%, making it more suitable for printing models with higher strength requirements.
Stabilized print dimensions
Bambu PLA-CF has low shrinkage and warping resistance to achieve perfect fit accuracy between printed parts.
Minimal effort for support removal
Bambu PLA-CF is designed for support. It can be removed more easily compared to regular PLA while still maintaining a smooth support interface.
Not prone to clogging during high-speed printing
Bambu PLA-CF is as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.
RFID for smart printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setup steps.
Downloads
Printing tips
• Drying PLA-CF is optional, but it is recommended to dry before use. The recommended drying condition is 55 ℃ for 8 hours in a blast dryer or 75 ℃ for 12 hours on the printer’s heated chamber. For more details, see the filament drying enclosure on the wiki.
