Bambu Lab PLA-CF Black (black with carbon fibers) - Refill without spool
Product details
- SKU:
- 6975337036524
- Brand:
- Bambu Lab
- Category:
- Filament
Product description
Bambu PLA-CF - Refill without spool
Bambu PLA-CF is PLA reinforced with carbon fibers with improved stiffness and strength. PLA-CF is easy to print and is suitable for beginners, just like regular PLA. It is compatible with AMS with a low risk of clogging during high-speed printing. Prints have a matte finish with nearly invisible layer lines, making them suitable for printing general engineering parts or models requiring a better appearance, such as bike frames, mounts, and toys.
Carbon fiber texture and minimized layer lines
The addition of carbon fibers gives prints a unique matte surface and effectively hides layer lines, providing a smooth, premium look.
Print display
Bambu PLA-CF can be paired with any filament from the PLA series to make your prints more colorful and to meet different texture requirements.
Improved mechanical properties
Bambu PLA-CF surpasses the mechanical properties of PLA Matte in flexural strength XY, flexural strength Z, flexural modulus XY, flexural modulus Z, impact strength XY, and impact strength Z by 20% and 115%, making it more suitable for printing models with higher strength requirements.
Stabilized print dimensions
Bambu PLA-CF has low shrinkage and warping resistance to achieve perfect dimensional accuracy and fit between printed parts.
Minimal effort to remove supports
Bambu PLA-CF is designed to be self-supporting. Supports can be removed more easily compared to regular PLA while still maintaining a smooth supported surface.
Not prone to clogging during high-speed printing
Bambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speeds without clogging.
RFID for intelligent printing
All printing parameters are built into the RFID, which can be read through our AMS (automatic material system). Load and print! No more tedious setup steps.
Downloads
Printing tips
• Drying PLA-CF is optional, but it is recommended to dry it before use. The recommended drying condition is 55 ℃ for 8 hours in a blast dryer or 75 ℃ for 12 hours on the printer's heated bed. For more details, please refer to the filament drying enclosure on the wiki.
