Bambu Lab PETG HF - Orange - Refill without spool
Product features
- Engineered for speed
- Print flawlessly with minimal tuning
- Smooth, fine texture
- Ready for outdoor use
- Comes with a low-temperature reusable spool
- Diameter: 1.75 mm +/- 0.03 mm
Usage notes
- Compatible with AMS and AMS lite
- Dry before use
Note: PETG HF must be dried before use to achieve optimal print quality.
Product details
- Brand:
- Bambu Lab
- Category:
- Filament
Product description
Bambu PETG HF - Refill without spool
PETG HF is a fully optimized PETG filament specifically designed for high-speed printing. With a default printing speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to a new level.
It effectively addresses common issues such as oozing and stringing associated with conventional PETG, ensuring smoother and more reliable prints. The new matte finish not only improves aesthetics by smoothing out uneven gloss during speed transitions, but also provides a consistently uniform look.
Offering greater durability and toughness than PLA, PETG HF is the ideal choice for creating long-lasting objects with an enhanced surface finish and faster production.
* Adrian Luben (Social Handle: @Marsgizmo)
Engineered for fast printing
Twice as fast as standard PETG, PETG HF significantly boosts your productivity without compromising print quality.
Print flawlessly with minimal tuning
Among PETG filaments, PETG HF excels in printability due to its higher adaptability to printers and print settings, achieving ideal results without fine-tuning parameters. With advanced formula optimization, PETG HF eliminates oozing and stringing, ensuring smoother prints with sharp details.
Smooth, fine texture
PETG HF delivers a smooth texture and consistent sheen at any print speed, ensuring uniformity and crisp details in every print.
Suitable for outdoor use
PETG HF retains the inherent properties of standard PETG, providing excellent resistance to water, UV radiation, and temperature. It is tougher and more durable than PLA, with higher heat resistance, making it an ideal choice for printing outdoor objects such as flower pots, bird cages, watering cans, and automotive parts. In addition, it is ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions, and drops.
Compatibility
| Recommended | Not recommended | |
| Plate | Smooth PEI Plate,Textured PEI Plate | Cool Plate |
| Hotend | All Size / Material | / |
| Adhesive | Bambu Liquid Glue Glue Stick |
/ |
PETG HF Hex table
| Color | Hex Code | Display |
| Yellow | #FFD00B | |
| Orange | #F75403 | |
| Green | #00AE42 | |
| Red | #BC0900 | |
| Blue | #002E96 | |
| Black | #000000 | |
| White | #FFFFFF | |
| Gray | #ADB1B2 |
Parameter comparison
| PLA Basic |
PETG HF
|
PETG Basic | |
| Printing Speed* | ~ 300 mm/s |
~ 300 mm/s
|
~ 200 mm/s |
| Preset Printing Speed* | 258 mm/s |
258 mm/s
|
172 mm/s |
| Strength (Bending Strength - XY) | 76 MPa |
64 MPa
|
65 MPa |
| Stiffness (Bending Modulus - XY) | 2750 MPa |
2050 MPa
|
1670 MPa |
| Layer Strength (Bending Strength - Z) | 59 MPa |
48 MPa
|
48 MPa |
| Layer Adhesion (Impact Strength - Z) | 13.8 kJ/m² |
10.6 kJ/m²
|
13.6 kJ/m² |
| Toughness (Impact Strength - XY) | 26.6 kJ/m² |
31.5 kJ/m²
|
52.7 kJ/m² |
| Heat Resistance (HDT, 0.45 MPa) | 57 °C |
69 °C
|
69 °C |
1. Maximum printing speed* refers to the highest speed achievable by the filament while maintaining high print quality, assuming proper nozzle temperature increase.
2. Preset maximum printing speed* refers to the highest speed achievable with default settings that ensures top print quality in most environments.
Settings: Bambu Lab X1-Carbon, 0.4 mm nozzle, 0.2 mm layer height
RFID for smart printing
All printing parameters are stored in RFID which can be read through our AMS (Automatic Material System).
Load and print! No lengthy setup.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 65 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 230 - 260 °C |
| Bed Temperature (with Glue) | 65 - 75 °C |
| Printing Speed | < 300 mm/s |
| Physical Properties | |
| Density | 1.28 g/cm³ |
| Vicat Softening Temperature | 70 °C |
| Heat Deflection Temperature | 69 °C |
| Melting Temperature | 214 °C |
| Melt Index | 28.2 ± 2.7 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 34 ± 4 MPa |
| Breaking Elongation Rate | 8.6 ± 1.2 % |
| Bending Modulus | 2050 ± 120 MPa |
| Bending Strength | 64 ± 3 MPa |
| Impact Strength | 31.5 ± 2.2 kJ/m² |
Downloads
Printing tips
Dry before use for higher print quality. PETG HF must be dried before use and kept moisture-free during printing, especially for longer print times (over 6 hours).
Drying conditions: 65℃, 8 hours in a drying oven; 75 - 85℃, 12 hours on the heated bed of the X1 series. For more information, visit: Filament drying recommendations on the WIKI.
