AURAPOL PET-G Filament Graphite Black 1 kg

Why choose AURAPOL PET‑G Graphite Black

AURAPOL PET‑G in an elegant graphite black color (1 kg) combines very good layer adhesion, low warping, and a glossy finish—an ideal choice for functional prototypes, jigs, enclosures, and technical parts. The material resists weathering and common chemicals and prints without odor.

• Made in the Czech Republic from virgin granulate (no recyclate).
• Optimized for Prusament PET‑G profiles (easy setup and consistent results).
• Excellent adhesion on a heated bed; for PEI/glass a release layer (glue/hairspray) is recommended.
• Glossy, uniform surface in a graphite black shade.

Note: PET‑G is commonly used in applications with food contact; always observe the certification requirements of the specific product and colorant.

Recommended print settings

• Nozzle temperature: 245–255 °C
• Bed temperature: 85–95 °C
• Build surface: glass/PEI/BuildTak/Kapton; a thin release layer is recommended for easier part removal.
• Cooling fan: medium to lower (depending on part geometry).
• Retraction: mild, depending on the printer and hotend.
  The above values are based on the official parameters for this filament.

Construction and packaging

• Filament weight: 1 000 g (length approx. 330 m)
• Diameter precision: ±0,02 mm
• The spool is vacuum-sealed in a protective bag.
• Made in the Czech Republic.

Spool dimensions (for easy holder planning)

• Outer diameter: 200 mm
• Spool width: 70 mm
• Center hole diameter: 55 mm
• Empty spool weight: ~220 g (black) / ~250 g (transparent).

Typical applications

• Mechanical parts and workshop jigs
• Enclosures, mounts, organizers, design elements
• Prototyping with higher toughness than PLA
• Larger prints with lower warping compared to ABS.

Tips for the best results

• If printing on smooth PEI or glass, apply a thin layer of glue stick or specialized lacquer for easier part removal.
• Store the spool dry before printing; PET‑G is moisture-tolerant, but drying further stabilizes surface quality.

Key features:

• Czech-made from virgin granulate—no recyclate
• Consistent diameter with ±0.02 mm precision for reliable extrusion
• Recommended temperatures 245–255/85–95 °C for wide compatibility with FFF printers
• Excellent layer adhesion and low shrinkage—suitable for larger parts
• Glossy graphite black surface for a representative appearance
• 1 kg spool (approx. 330 m) vacuum-sealed for moisture protection
• Easy to use—optimized for the Prusament PET‑G profile