Filamentree PETG Flame Red T 1kg

Filamentree PETG Flame Red T 1kg

Filamentree PETG Flame Red T is a premium PETG filament designed for reliable and visually attractive 3D printing. It combines easy printing properties similar to PLA with strength and toughness close to ABS, making it ideal for both functional prototypes and final parts.

The designation „Flame Red T“ represents a translucent (transparent) deep red shade that gives prints a striking and "vivid" look. Thanks to its high resistance to impact, moisture, and chemicals, the filament is also suitable for technical and outdoor use.

Main advantages

• Easy printing like PLA\nPETG prints very comfortably, without significant curling and with minimal deformation.
• Higher strength and toughness\nThe material withstands mechanical stress well and is resistant to impact and cracking.
• Transparent red shade „Flame Red T“\nThe translucent, deep red color is perfect for decorative and backlit models, logos, gaming, and design elements.
• Excellent layer adhesion\nLayer lines bond well, increasing the overall strength of the print and reducing the risk of delamination.
• Moisture and chemical resistance\nPETG is suitable for parts used in more demanding environments – e.g., in a workshop, garage, or for various covers and holders.
• Good thermal resistance (up to approx. 80 °C)\nPETG prints can withstand higher temperatures than PLA, so they do not deform as easily in warmer environments.

Typical use

• Functional prototypes and mechanical components
• Holders, grips, covers, mounting fixtures
• Illuminated elements, LED lamps, diffusers, design decorative models
• Advertising and presentation objects with high visual attractiveness
• Partial outdoor components (with normal exposure to weather)

Recommended print settings

Specific values may vary depending on the printer, nozzle, and build plate – take them as initial recommendations.

• Nozzle temperature: 230–240 °C
• Bed temperature: 60–70 °C
• Print speed: approx. 40–100 mm/s (up to more for high-performance printers, depending on extruder capabilities)
• Cooling: low to medium; first layers preferably without or with minimal cooling for better adhesion
• Build plate: textured/structured PEI, glass with adhesive, or other surface suitable for PETG

For the first layer, we recommend slightly increasing the bed temperature and reducing the print speed to achieve reliable adhesion. PETG tends to "stick" more strongly to some surfaces – for smooth PEI or glass, print with a reasonable first layer height to avoid damaging the sheet.

PETG material properties

• Material: PETG (Polyethylene Terephthalate Glycol-modified)
• Density: approx. 1.24 g/cm³
• Heat resistance: up to approximately 80 °C
• Low shrinkage and deformation during printing
• Very good dimensional accuracy and diameter consistency

Suitable printers

Filamentree PETG Flame Red T is designed for most common FDM/FFF 3D printers with:

• filament diameter 1,75 mm
• nozzle capable of reaching temperatures around 230–240 °C
• heated bed up to at least approx. 70 °C

It is suitable for both beginners who already have basic experience with PLA and want a stronger material, and for advanced users and professionals who need more durable, visually attractive parts.

Storage

To maintain the best properties, we recommend:

• keeping the spool dry, ideally in a sealable box with desiccant
• protecting from direct sunlight and high temperatures

Well-stored PETG will maintain consistent color, printing properties, and strength over the long term.

Key features:

• Premium PETG filament for reliable 3D printing of functional and decorative parts
• Transparent deep red shade „Flame Red T“ for impressive and backlit models
• Easy printing with behavior similar to PLA, but higher strength and toughness close to ABS
• Excellent layer adhesion and low shrinkage – minimal deformation and cracking
• Moisture and chemical resistance, suitable for technical and outdoor use
• Heat resistance up to approx. 80 °C for parts exposed to higher temperatures
• High dimensional accuracy with diameter tolerance < 0.03 mm