Bambu Lab PLA Silk Multi-Color Midnight Blaze 1kg

Bambu Lab PLA Silk Multi-Color Midnight Blaze 1kg

Bambu Lab PLA Silk Multi-Color Midnight Blaze is a special dual-color PLA filament with a silk effect that elevates the look of your 3D prints to a whole new level. Two distinct colors – Blue and Red (Blue‑Red) – are combined in a single strand, split across the filament cross-section. During printing, this creates natural color transitions, stripes, and unique patterns without complex multi-color setups.

This filament is designed primarily for decorative and design prints, trophies, cosplay accessories, figurines, vases, electronics housings, and any models where visual effect and a luxurious appearance are important.

Key Features

• Dual-color design Midnight Blaze (Blue‑Red)
  Two silky colors (blue and red) in one strand create smooth transitions and attractive gradients.

• Silky, high-gloss surface
  The special PLA Silk formulation gives prints a smooth, vibrant surface reminiscent of a lacquered or metallized finish.

• Easy to print like regular PLA
  The material has similar printing properties to classic PLA – low shrinkage, minimal warping, and trouble-free processing even on open FDM printers.

• Compatible with Bambu Lab AMS / AMS Lite
  The filament is fully compatible with the Bambu Lab AMS automatic material feeder, allowing for convenient use in multi-material scenarios.

• Precise diameter and quality winding
  A filament diameter of 1,75 mm ± 0,03 mm ensures reliable material feeding and consistent print quality.

• Odorless, eco-friendly, and safe for general use
  The PLA base guarantees low odor during printing and easy recyclability compared to technical plastics.

Recommended Use

• Decorative and design models
• Figurines, busts, statues, cosplay accessories
• Trophies, medals, awards, and gift items
• Luxury-looking cases, covers, stands, and holders
• Display and presentation prototypes

Thanks to the unique color transitions, every print is an original. By rotating the model on the build plate, you can influence which color dominates on individual sides.

Printing Recommendations

For best results, Bambu Lab recommends:

• Nozzle temperature: 210–240 °C
• Bed temperature: 35–45 °C (recommended with a glue stick or suitable adhesive)
• Recommended printing speed: up to 250 mm/s
• Outer walls: ideally slow down to approx. 40 mm/s for a maximally smooth and glossy surface
• Filament drying: 55 °C for approx. 8 hours before printing and store in dry conditions (<20 % RH) for consistent gloss

Print the filament with the same basic parameters as classic PLA, but with an emphasis on lower speeds for outer perimeters to enhance the silk effect.

Material Properties

• Material type: PLA Silk Multi-Color (dual-color PLA Silk)
• Appearance: silky, high-gloss, multicolor
• Color: Midnight Blaze – combination of Blue / Red
• Filament diameter: 1,75 mm ± 0,03 mm
• Density: approx. 1,32 g/cm³
• VICAT softening temperature: ~56 °C
• Heat deflection temperature: ~53 °C
• Tensile strength: ~27 MPa
• Flexural modulus: ~2370 MPa
• Elongation at break: ~3,5 %

Note: Like other PLA filaments, this material is not suitable for long-term use above approx. 50 °C (e.g., in a hot car in the sun).

Compatibility

• All common FDM 3D printers with 1,75 mm diameter
• Full compatibility with Bambu Lab printers (X1, P1, A1, A1 mini, etc.)
• AMS / AMS Lite / AMS 2 Pro – yes (recommended to keep filament well-dried)

Packaging

• 1 kg filament on a Bambu Lab spool
• Resealable packaging with a silica gel bag for moisture protection

This filament is an ideal choice for anyone wanting to get maximum effect, vivid colors, and visually impressive prints from their printer without complex multi-material printing setups.

Key Features:

• Dual-color PLA Silk filament Midnight Blaze (Blue‑Red) with striking color transitions
• Luxurious silky, high-gloss surface for exclusive decorative prints
• Easy to print – behaves similarly to classic PLA, low shrinkage and warping
• Full compatibility with Bambu Lab AMS / AMS Lite and Bambu Lab printers
• Precise diameter 1,75 mm ± 0,03 mm for reliable feeding and consistent quality
• Ideal for figurines, trophies, vases, design accessories, and gift items
• 1 kg of high-quality filament on a sturdy Bambu Lab spool