Bambu Lab PLA Silk Dual Color Velvet Eclipse (Black-Red)
Bambu Lab PLA Silk Dual Color Velvet Eclipse (Black-Red) is a premium dual-color PLA Silk filament with an impressive combination of black and red within a single strand. When the model is rotated, the colors change optically and create a luxurious, silky glossy surface, ideal for decorations, figurines, gifts, and designer models. The filament is fully compatible with Bambu Lab printers and the AMS/AMS Lite system and is supplied on a reusable Bambu spool.
Product details
- Brand:
- Bambu Lab
- Category:
- Filament
Product description
Product description
Bambu Lab PLA Silk Dual Color Velvet Eclipse (Black-Red) is an aesthetic PLA Silk filament with a dual-color composition, where black and red run in parallel within a single strand. The result is exceptionally attractive prints with a silky gloss and dynamic color transitions that change depending on the viewing angle and print orientation.
This filament is designed for easy printing on Bambu Lab printers (including AMS and AMS Lite) as well as on standard FDM printers with a filament diameter of 1,75 mm. It is especially suitable for decorative models, statues, vases, design elements, cosplay accessories, and gift items, where surface appearance is the priority.
The Velvet Eclipse (Black-Red) variant corresponds to the combination black / red (Black, Red).
Key features
- Dual-color Silk effect (Black-Red) – two colors in one strand, prints black and red side by side simultaneously.
- Silky glossy surface – ideal for representative and aesthetic prints.
- Dynamic appearance change – the colors visually change when the model is rotated, creating a pronounced 3D effect.
- Full compatibility with Bambu Lab AMS / AMS Lite – RFID chip with stored parameters for “load & print” use.
- Easy to print like PLA – low warping, good layer adhesion, also suitable for advanced beginners.
- Reusable plastic Bambu Lab spool – more environmentally friendly and practical for storage.
- High gloss with adjustable level – gloss can be influenced by nozzle temperature and print speed.
Recommended applications
- Decorative and gift items
- Figures, busts, gaming and collector models
- Artistic and design projects
- Display models (logos, signs, trophies, awards)
- Vase and artistic prints with emphasis on surface appearance
Note: PLA Silk is generally not recommended for functional mechanical parts exposed to elevated temperatures – it is primarily an aesthetic material.
Technical specifications
Basic parameters
| Parameter | Value |
|---|---|
| Material | PLA Silk Dual Color |
| Manufacturer | Bambu Lab |
| Variant name | Velvet Eclipse (Black-Red) |
| Color combination | Black / Red |
| Filament diameter | 1,75 mm |
| Diameter tolerance | ± 0,03 mm |
| Net filament weight | 1 kg |
| Spool type | Reusable Bambu Lab spool |
| RFID chip | Yes (for Bambu Lab printers with AMS) |
Recommended print settings
| Parameter | Recommended value |
|---|---|
| Nozzle temperature | approx. 230–240 °C (depending on the desired gloss) |
| Bed temperature | approx. 35–45 °C (with glue) or according to the printer profile |
| Print speed | outer walls 30–60 mm/s, max. speed up to 250 mm/s |
| Recommended layer height | 0,12–0,28 mm |
| Build plate | Cool Plate SuperTack, Smooth PEI, Textured PEI, 3D Effect Plate |
To achieve higher gloss, it is recommended to use a higher nozzle temperature and lower outer wall speed (e.g. 40 mm/s).
Compatibility
- Recommended Bambu Lab nozzles:
- Hardened Steel 0,4 mm
- Stainless Steel 0,2 mm / 0,4 mm
- Not recommended nozzles: 0,6 mm and 0,8 mm (officially not recommended by Bambu for PLA Silk Multi/Dual Color).
- Other printers: standard brass or steel nozzles 0,2–0,4 mm for PLA.
Material properties of PLA Silk (indicative)
| Property | Value (indicative) |
|---|---|
| Density | approx. 1,27 g/cm³ |
| Vicat softening temperature | ~66 °C |
| Heat deflection temperature | ~60 °C |
| Melting temperature | ~158 °C |
| Tensile strength | approx. 33 MPa |
| Elongation at break | ~2,8 % |
| Flexural strength | approx. 75 MPa |
The values are typical for PLA Silk from Bambu Lab and may vary slightly depending on the batch.
Tips for printing and storage
- Drying: before printing, it is recommended to dry the filament (e.g. 55 °C for 8 hours), especially if it has been open for a longer time.
- Storage: store in a resealable bag or box with desiccant, ideally in an AMS with low humidity.
- Speed and retraction: for Silk filaments, slightly lower speeds and reasonable retraction values are recommended to minimize the risk of clogging.
- Outer walls slower: for a smooth, glossy surface, print the outer walls more slowly than the rest of the model.
Safety and use
- Print in a well-ventilated area.
- This material is not intended for food contact.
- Do not expose finished prints to elevated long-term temperatures (e.g. in a car behind a window in direct sunlight), as deformation may occur.
Summary
Bambu Lab PLA Silk Dual Color Velvet Eclipse (Black-Red) is a top-tier dual-color aesthetic filament for anyone who wants to give their prints an exceptional appearance. The silky, highly glossy surface and dual-color effect make it an excellent choice for decorations, figurines, and designer models, especially on Bambu Lab printers with RFID and AMS support.
Key features:
- Dual-color PLA Silk filament Velvet Eclipse in a black / red (Black-Red) combination for striking decorative prints.
- Silky glossy, highly attractive surface ideal for figurines, decorations, and designer models.
- Dynamic color effect – black and red printed side by side, appearance changes when the model is rotated.
- Full compatibility with Bambu Lab printers including AMS and AMS Lite, with an RFID chip for automatic parameter loading.
- Easy to print like standard PLA with low warping and good layer adhesion.
- Recyclable, reusable Bambu Lab spool for convenient storage and reduced environmental impact.
- Optimized for printing on PEI and Cool plate build surfaces with a recommended lower outer wall speed for maximum gloss.
- Suitable for a wide range of FDM/FFF printers with 1,75 mm filament diameter, not only for Bambu Lab.
